Avaliação do Emprego de Cloreto Férrico e Tanino como Coagulantes na Remoção de Sólidos de Efluentes Industriais

Eficiência na Qualidade dos Efluentes Industriais Tratados

Autores

  • Guilherme dos Santos Castro Departamento de Engenharia Química, Universidade Tecnológica Federal do Paraná (UTFPR), Londrina-PR, Brasil.
  • Joseane Debora Peruço Theodoro Departamento de Engenharia Ambiental, Universidade Tecnológica Federal do Paraná (UTFPR), Londrina-PR, Brasil.
  • Silvia Priscila Dias Monte Blanco Departamento de Engenharia Química, Universidade Tecnológica Federal do Paraná (UTFPR), Londrina-PR, Brasil.
  • Joel Fernando Nicoleti Departamento de Engenharia Química, Universidade Tecnológica Federal do Paraná (UTFPR), Londrina-PR, Brasil.

DOI:

https://doi.org/10.5132/eec.2023.01.10

Palavras-chave:

Coagulation, Efficiency, Wastewater treatment

Resumo

The circular economy has generated a lot of interest in the industrial sector, and one of the proposed principles is the reuse of waste generated by the industry. In this sense, it is important to apply adequate treatments for their reuse, thus avoiding inappropriate disposal, in addition to bringing economic advantages to the sector. The present proposal applied the alternative coagulants ferric chloride and tannin aiming at the removal of solids from the effluent generated in the painting booth for gas containers (GLP) of the company Supergasbras, headquartered in Londrina-PR, since it uses iron sulfate . The experimental planning for the tests followed by varying two factors, sedimentation time and coagulant dosage, subdivided into 3 coded levels (+1, 0 -1), thus totaling 9 experiments in duplicate. After the experiment, analyzes of the pH, apparent color, turbidity and COD indicators were carried out. Ferric chloride proved to be extremely efficient for removing turbidity and chemical oxygen demand, with values ​​exceeding 90% removal, in addition, the apparent color indicator also obtained a good result. However, in relation to the pH, all the tests with ferric chloride acquired an acid character, consequently it is necessary to use lime to correct the acidity. The application of the tannin organic coagulant, in turn, provided excellent efficiency in removing apparent color and turbidity, in addition to obtaining adequate pH values ​​that comply with current legislation. Regarding the removal of the chemical demand for oxygen, it is approximately 90% for all tests using tannin as a coagulant.

Downloads

Não há dados estatísticos.

Downloads

Publicado

2023-07-02

Como Citar

Castro, G. dos S., Theodoro, J. D. P., Monte Blanco, S. P. D., & Nicoleti, J. F. (2023). Avaliação do Emprego de Cloreto Férrico e Tanino como Coagulantes na Remoção de Sólidos de Efluentes Industriais: Eficiência na Qualidade dos Efluentes Industriais Tratados. Ecotoxicology and Environmental Contamination, 18(1), 90–96. https://doi.org/10.5132/eec.2023.01.10

Edição

Seção

Artigos